• Your shopping cart is empty!

Ball Bearing T3  T04E Turbocharger
Ceramic Ball Bearing on Compressor Side
Super Quick and Fast Spool. Stage III Turbine Wheel.
.50 A/R Compressor Housing, .63A/R Turbine Housing
T3 Flange to Manifold
4 Bolt 2.5" Downpipe Flange
3" Inlet & 2" Outlet

Item(s) Specification :
- 3" Inlet
- 2" Outlet
- Ball Bearing Compressor
- 1/8 NPT Oil Inlet
- Standard T3 Flange,
- 350 WHP
- Working Pressure: 5-20 PSI
- .50 A/R Compressor
- .63 A/R Turbine
- Compressor Wheel: 2.99" Exducer ,2.28" Inducer
- Turbine Wheel 2.20" Exducer , 2.40" Inducer
- 4 Bolt Hot Side

Perfect for any 4-6 cylinder.
Mitsubishi Eclipse, Honda Civic, Prelude, Integra, Ford 2.3L Turbo Etc.

Optional Turbo Oil Feeding Line Kit Braided for T3 T4 T04E T04B
- Our Oil Feeding Flange has Restriction build in, Supplies proper Oil feeding to the turbo. Be Aware that other oil kit may just have a big hole and can blow Exhaust Sealing Easily.

　

Optional Manual Turbo Boost Controller

Optional T3 Turbo Manifold Flange

Optional Turbo Oil Return Line Kit AN10
- Two AN-10 Aluminum Fitting (One Straight, one 45deg)
- One AN-10 Weld on Steel Fitting (weld to oil pan)
- One 24 inch long Braid Oil Line

Optional Turbo Oil Drain Flange
- Billet Aluminum CNC Made, High Quality
- Push In OD 5/8", Fits 5/8" ID hose.

Optional 4AN Oil Feed Flange Adaptor
- Built in oil restrictor to Protect your turbo from high pressured oil feed
- Two Mounting Screw holes Centerline to Centerline is 1.5"

Write a review

Please login or register to review

Ceramic Ball Bearing Turbo Charger T3 T04E 4 Bolts .50 .63AR 4 Bolt Stage 3

  • Brand: CXRacing
  • Product Code: TRB-T04E-5063-4B-R_FLNG-OIL-FEED-AN4
  • Availability: In Stock

  • $383.88

Available Options


0 reviews / Write a review

Tags: Ball Bearing T3 T04E Turbocharger Ceramic Ball Bearing on Compressor Side Super Quick and Fast Spool. Stage III Turbine Wheel. .50 A/R Compressor Housing, .63A/R Turbine Housing T3 Flange to Manifold 4 Bolt 2.5" Downpipe Flange 3" Inlet & 2" Outlet Item(s) Specification : - 3" Inlet - 2" Outlet - Ball Bearing Compressor - 1/8 NPT Oil Inlet - Standard T3 Flange, - 350 WHP - Working Pressure: 5-20 PSI - .50 A/R Compressor - .63 A/R Turbine - Compressor Wheel: 2.99" Exducer, 2.28" Inducer - Turbine Wheel 2.20" Exducer, 2.40" Inducer - 4 Bolt Hot Side Perfect for any 4-6 cylinder. Mitsubishi Eclipse, Honda Civic, Prelude, Integra, Ford 2.3L Turbo Etc. Optional Turbo Oil Feeding Line Kit Braided for T3 T4 T04E T04B - Our Oil Feeding Flange has Restriction build in, Supplies proper Oil feeding to the turbo. Be Aware that other oil kit may just have a big hole and can blow Exhaust Sealing Easily. 　 Optional Manual Turbo Boost Controller Optional T3 Turbo Manifold Flange Optional Turbo Oil Return Line Kit AN10 - Two AN-10 Aluminum Fitting (One Straight, one 45deg) - One AN-10 Weld on Steel Fitting (weld to oil pan) - One 24 inch long Braid Oil Line Optional Turbo Oil Drain Flange - Billet Aluminum CNC Made, High Quality - Push In OD 5/8", Fits 5/8" ID hose. Optional 4AN Oil Feed Flange Adaptor - Built in oil restrictor to Protect your turbo from high pressured oil feed - Two Mounting Screw holes Centerline to Centerline is 1.5"



Emission Notes:

All Parts and services offered by CX-GARAGE are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this competition use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assumes all associated risk of the purchase.

Federal and several state laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. CX-GARAGE assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer’s modifications and/or use of CX-GARAGE products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.