Turbo + Intercooler Kit For 84-91 BMW 3-Series E30 Chassis / M20 Engine, 6 Cyl, Convert to Top Mount T3 /T4 Turbo

This Intercooler Kit is Re-Developed for Better Fitment and Performance:

-Bolt On Manifold
-GT35 T3 Turbo, Supports 500 HP
-Large Intercooler Core Fills Up Entire Front Grill Space
-With Top and Bottom Aluminum Brackets, Professional Look
-Bottom Bracket Also Has Oil Cooler Mounting Provision
-2.5" Aluminum Piping Kit with BOV
-Fits Factory Intake MAF Unit
-Intercooler Core Size: 18"x11"x3". 2.5" Inlet and Outlet

APPLICATION(S):
Chassis: 84-91 BMW 3-Series with E30 Chassis
Motor: Factory M20 Convert to Top Mount T3 /T4 Turbo

Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.

Product(S):
Manifold and 3" Downpipe Kit With Vband Clamp x1
GT35 Turbocharger x1
38mm 8PSI Wastegate x1
Air Filter x1
Oil Line Kit x1
Intercooler, with Mounting Bracket x1
Intercooler Piping Kit with Hoses, Clamps x1
Blow Off Valve x1

Optional One Dual Ball Bearing Turbo is Available with Extra Payment, Please Select the Ball Bearing Option When Buying.

Installed Pictures:

                                               

Write a review

Please login or register to review

Turbo Manifold Intercooler Piping For 84-91 BMW 3-Series E30 M20 Engine

  • Brand: CXRacing
  • Product Code: TRB-KIT-E30-GT35-DP-IC-NEW
  • Availability: In Stock
  • $1,680.70


Available Options


Tags: Turbo + Intercooler Kit For 84-91 BMW 3-Series E30 Chassis / M20 Engine, 6 Cyl, Convert to Top Mount T3 /T4 Turbo This Intercooler Kit is Re-Developed for Better Fitment and Performance: -Bolt On Manifold -GT35 T3 Turbo, Supports 500 HP -Large Intercooler Core Fills Up Entire Front Grill Space -With Top and Bottom Aluminum Brackets, Professional Look -Bottom Bracket Also Has Oil Cooler Mounting Provision -2.5" Aluminum Piping Kit with BOV -Fits Factory Intake MAF Unit -Intercooler Core Size: 18"x11"x3". 2.5" Inlet and Outlet APPLICATION(S): Chassis: 84-91 BMW 3-Series with E30 Chassis Motor: Factory M20 Convert to Top Mount T3 /T4 Turbo Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Product(S): Manifold and 3" Downpipe Kit With Vband Clamp x1 GT35 Turbocharger x1 38mm 8PSI Wastegate x1 Air Filter x1 Oil Line Kit x1 Intercooler, with Mounting Bracket x1 Intercooler Piping Kit with Hoses, Clamps x1 Blow Off Valve x1



Emissions Control Warning:

It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

All Products by CX-GARAGE are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.