CXRacing T76 Single Turbo Kit + Intercooler Kit For Nissan 240SX S13 S14
With LS1/LSx Swap
Big T76 Turbo, Good For 600 WHP to the Wheel. 4" Core Intercooler, 3" Turbo
Downpipe
This Is CXRacing's Newest LS1 Turbo Kit for S13/S14. We Used Similar Single
Turbo Kit On Our 2014 Season FD Race Car with Great Success, We Then Revised and
Developed This Kit To Keep Radiator at Stock Location.
It Is A Simple Setup for Drifters Who Want Big Power, Comes with Many
Innovative Features:
1. Keeps Radiator at Stock Location.
2. Use A Patented Twin 2.5" to T4 Cast Merge Collector, Provides the Best Flow
for Turbo Spooling.
3. Support Big T4 Turbo (We Used T76 Turbo for This Setup), Up to 600 WHP
4. Support Dual 44MM Vband Wastegate
5. Compatible with Other CXRacing Product for LS1/S13/S14 Swap, Such As Engine
Mount, Trans Mount, Oil Pan Etc.
Note:
1. This Kit Is for Hardware Only, You Will Need to Upgrade Fuel System and Tune
the Engine to Support Big Power.
2. No Installation Guide Is Provided. But We Show Many Installed Pictures and It
Is Very Intuitive.
3.This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.
Application:
- Chassis: Nissan 240SX S13 S14
- Motor: GM LS1/LSx
This is CXRacing's Newest Products for the Application Stated Above. All Parts
Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for
Improved Performance Gains, with Excellent Fitment and Easy Installation.
Product Being Sold:
- T76 Turbo + Manifolds + Downpipes + Wastegates + Intercooler Kit
This is CXRacing's Newest Products for the Application Stated Above. All Parts
Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for
Improved Performance Gains, with Excellent Fitment and Easy Installation.
Note: Radiator Kit, Catback System Are NOT Included. We
Offer Them Separately with Other Items.
Product Info and Spec:
Intercooler:
- Bar & Plate Aluminum Intercooler
- Core Size: 24"x12"x4"
- Overall Size: 31"x12"x4"
- 3" Inlet & Outlet, 4" Thickness Core
Piping Kit:
- 3" Mandrel Bent Aluminum Pipe
- Comes with 50mm BOV, Silicon Hoses, and T-Bolt Clamps
Turbo and Wastegates:
- 4" Air Inlet, 2.5" Compressed Air Outlet
- Standard T4 Flange
- 76mm Wheel Compressor
- P Trim .96 A/R Turbine
- 3" V-band Hot Side
- 44mm Wastegate 8 PSI (2 pcs)
Manifolds:
- High Flow Mandrel Bent Runners
- 2.5" Cross Pipe
- Supports T4 Turbo
- Supports Dual 44mm Wastegate
- Twin 2.5" to T4 Cast Merge Collector Provides The Best Exhaust Flow
Downpipe:
- 3" Vband Connects to Turbo
- 3" Stainless Steel Downpipe
- Downpipe Ends Somewhere Close to the Transmission End
- You Will Need to Come Up with The Rest Of the Exhaust System
Item Included:
-T76 Turbo x1
-Turbo Manifold Downpipe Kit x1
-44MM 8Psi V Band Wastegate x2
-Intercooler, with Mounting Bracket x1
-Intercooler Piping Kit with Hoses,Clamps and BOV x1
-Oil Filter Sandwich and Oil Line Kit x1
-Air Filter x1
-Set of Vband Clamp x1
-Twin 2.5" to T4 Elbow Adapter x1
Optional Dual Ball Bearing Turbo is Available with Extra Payment, Please Select the Ball Bearing Option When Buying.
Turbo Manifold Downpipe Intercooler Kit 240SX S13 S14 LS1 LSx Engine Swap
- Brand: CXRacing
- Product Code: TRB-KIT-LS-S13-T76-IC
- Availability: In Stock
-
$2,485.18
Available Options
Tags: CXRacing T76 Single Turbo Kit + Intercooler Kit For Nissan 240SX S13 S14 With LS1/LSx Swap Big T76 Turbo, Good For 600 WHP to the Wheel. 4" Core Intercooler, 3" Turbo Downpipe This Is CXRacing's Newest LS1 Turbo Kit for S13/S14. We Used Similar Single Turbo Kit On Our 2014 Season FD Race Car with Great Success, We Then Revised and Developed This Kit To Keep Radiator at Stock Location. It Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features: 1. Keeps Radiator at Stock Location. 2. Use A Patented Twin 2.5" to T4 Cast Merge Collector, Provides the Best Flow for Turbo Spooling. 3. Support Big T4 Turbo (We Used T76 Turbo for This Setup), Up to 600 WHP 4. Support Dual 44MM Vband Wastegate 5. Compatible with Other CXRacing Product for LS1/S13/S14 Swap, Such As Engine Mount, Trans Mount, Oil Pan Etc. Note: 1. This Kit Is for Hardware Only, You Will Need to Upgrade Fuel System and Tune the Engine to Support Big Power. 2. No Installation Guide Is Provided. But We Show Many Installed Pictures and It Is Very Intuitive. 3.This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues. Application: - Chassis: Nissan 240SX S13 S14 - Motor: GM LS1/LSx This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation. Product Being Sold: - T76 Turbo + Manifolds + Downpipes + Wastegates + Intercooler Kit This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation. Note: Radiator Kit, Catback System Are NOT Included. We Offer Them Separately with Other Items. Product Info and Spec: Intercooler: - Bar & Plate Aluminum Intercooler - Core Size: 24"x12"x4" - Overall Size: 31"x12"x4" - 3" Inlet & Outlet, 4" Thickness Core Piping Kit: - 3" Mandrel Bent Aluminum Pipe - Comes with 50mm BOV, Silicon Hoses, and T-Bolt Clamps Turbo and Wastegates: - 4" Air Inlet, 2.5" Compressed Air Outlet - Standard T4 Flange - 76mm Wheel Compressor - P Trim .96 A/R Turbine - 3" V-band Hot Side - 44mm Wastegate 8 PSI (2 pcs) Manifolds: - High Flow Mandrel Bent Runners - 2.5" Cross Pipe - Supports T4 Turbo - Supports Dual 44mm Wastegate - Twin 2.5" to T4 Cast Merge Collector Provides The Best Exhaust Flow Downpipe: - 3" Vband Connects to Turbo - 3" Stainless Steel Downpipe - Downpipe Ends Somewhere Close to the Transmission End - You Will Need to Come Up with The Rest Of the Exhaust System Item Included: -T76 Turbo x1 -Turbo Manifold Downpipe Kit x1 -44MM 8Psi V Band Wastegate x2 -Intercooler, with Mounting Bracket x1 -Intercooler Piping Kit with Hoses, Clamps and BOV x1 -Oil Filter Sandwich and Oil Line Kit x1 -Air Filter x1 -Set of Vband Clamp x1 -Twin 2.5" to T4 Elbow Adapter x1