• Your shopping cart is empty!

CXRacing T3/T4 Turbo Manifold For 98-05 Lexus IS300 2JZ-GE NA-T

Brand NEW Design of Top Mount T4 Turbo Manifold with Equal Length and Long Tube Runner Design, Support Bigger HP and Higher Torque.

Supports T4 Turbo Up to 70mm Wheel (Good For 500 HP), 46mm Vband Wastegate

Bolt On Fitment, No Need to Relocate Anything. Turbo Is Positioned A Little Big Backward, to Free More Front Clearance, Keeps Stock ABS Unit (See Picture Below).

Note:
Manifold Fits GT35-T4 Turbo Perfectly, However, the 4th Runner is Placed In the Middle Between Turbo Compressor and Turbine Housing. Larger Turbo May Hit One of These Housing.

Application:
Chassis: 98-05 Lexus IS300
Motor: 2JZ-GE
Turbo: T3 or T4, Top Mount

Product Being Sold:
Turbo Manifold

Product Info and Spec:

Manifold:
New Design with Turbo Placed Towards the Back, Offers Lots of Room in the Front to Clear Distributor and Engine Water Tube
16 Gauge (1.6mm) Thickness Wall 1.75" OD Elbow, 6-1 Merge Collector for Optimized Air Flow T4 Turbo and 46mm Wastegate Flange
Keep Factory ABS Unit

Notes:

Due To Factory ECU Issues, for 2JZ-GE VVTI Setup, Make Sure You Have a Tuning Solution (Standalone Computer Is Highly Recommended)

Before You Know What to Use to Tune The Motor, Do NOT Plug-in ALL Factory O2 Sensors, Otherwise Factory ECU May Go into Limp Mode.

This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.
　 　 　 Click Below Picture to See Running Video: 　 　 　 　 　 　 　 　 　 　 　 　 　

Write a review

Please login or register to review

T4 Turbo Manifold For 98-05 Lexus IS300 2JZ-GE NA-T Keeps ABS Unit

  • Brand: CXRacing
  • Product Code: MF-2JZGE-IS300
  • Availability: In Stock

  • $582.33


0 reviews / Write a review

Tags: CXRacing T3/T4 Turbo Manifold For 98-05 Lexus IS300 2JZ-GE NA-T Brand NEW Design of Top Mount T4 Turbo Manifold with Equal Length and Long Tube Runner Design, Support Bigger HP and Higher Torque. Supports T4 Turbo Up to 70mm Wheel (Good For 500 HP), 46mm Vband Wastegate Bolt On Fitment, No Need to Relocate Anything. Turbo Is Positioned A Little Big Backward, to Free More Front Clearance, Keeps Stock ABS Unit (See Picture Below). Note: Manifold Fits GT35-T4 Turbo Perfectly, However, the 4th Runner is Placed In the Middle Between Turbo Compressor and Turbine Housing. Larger Turbo May Hit One of These Housing. Application: Chassis: 98-05 Lexus IS300 Motor: 2JZ-GE Turbo: T3 or T4, Top Mount Product Being Sold: Turbo Manifold Product Info and Spec: Manifold: New Design with Turbo Placed Towards the Back, Offers Lots of Room in the Front to Clear Distributor and Engine Water Tube 16 Gauge (1.6mm) Thickness Wall 1.75" OD Elbow, 6-1 Merge Collector for Optimized Air Flow T4 Turbo and 46mm Wastegate Flange Keep Factory ABS Unit Notes: Due To Factory ECU Issues, for 2JZ-GE VVTI Setup, Make Sure You Have a Tuning Solution (Standalone Computer Is Highly Recommended) Before You Know What to Use to Tune The Motor, Do NOT Plug-in ALL Factory O2 Sensors, Otherwise Factory ECU May Go into Limp Mode.



Emission Notes:

All Parts and services offered by CX-GARAGE are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this competition use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assumes all associated risk of the purchase.

Federal and several state laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. CX-GARAGE assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer’s modifications and/or use of CX-GARAGE products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.