CXRacing Intercooler + Piping Pipe Tube Kit + Turbo Intake Air Filter Kit For Subaru BRZ/ Scion FRS with 2JZ-GTE Swap with Single Turbo Upgrade

Intercooler + Piping + Hoses + Clamps + BOV+ Brackets + Intake Pipe + Air Filter

Bar and Plate Intercooler

2.5" Hot Side and 3" Cold Side Piping Kit, New Low Profile Turbo Outlet Pipe, Clears Hood Clearance

3" Intake Pipe, With MAF Flange Welded

Note:

This Is A Proprietary Design By CXRacing, Fits CXRacing's 2JZGTE/BRZ/FRS Swap Kit. If You Use Different Engine Mount and Turbo Manifold, Fitment Will Be Off and the Pipe Connects to Turbo Will Need Modification

Radiator Hard Pipe Kit Shown On Installed Pictures Is NOT Included, We Offer It With Other Kits, Please Check Our website


Application(s):
- Chassis: Subaru BRZ/ Scion FRS
- Motor: Toyota 2JZ-GTE
- Turbo: Single Turbo (Not for Stock Twin Turbo)

PRODUCT(S):
- 1x Aluminum Intercooler, With Mounting Brackets
- 1x Aluminum Piping Kit
- 1x Set of Silicon Hose (Blue or Black)
- 1x Set of T-bolt Clamp
- 1x Blow Off Valve
- 1x Air Filter

Technical Specifications:
- Intercooler: Bar & Plate Intercooler, 23"x9.5"x3.5" Core Size, 33"x9.5"x3.5" Overall Size, 3.5" Thickness Core, 2.5" Inlet/Outlet
- Piping Kit: Mandrel Bent Aluminum Pipe, Comes with BOV , Air Filter , Silicon Hoses, and T-Bolt Clamps

Installed Photos:


































Write a review

Please login or register to review

Intercooler Pipe Tube Kit Turbo Intake For Subaru BRZ/ Scion FRS 2JZ-GTE Single Turbo

  • Brand: CXRacing
  • Product Code: KIT-2JZGTE-ST-BRZ-IC0058-AI
  • Availability: In Stock
  • $562.73


Available Options


Tags: CXRacing Intercooler + Piping Pipe Tube Kit + Turbo Intake Air Filter Kit For Subaru BRZ/ Scion FRS with 2JZ-GTE Swap with Single Turbo Upgrade Intercooler + Piping + Hoses + Clamps + BOV+ Brackets + Intake Pipe + Air Filter Bar and Plate Intercooler 2.5" Hot Side and 3" Cold Side Piping Kit, New Low Profile Turbo Outlet Pipe, Clears Hood Clearance 3" Intake Pipe, With MAF Flange Welded Note: This Is A Proprietary Design By CXRacing, Fits CXRacing's 2JZGTE/BRZ/FRS Swap Kit. If You Use Different Engine Mount and Turbo Manifold, Fitment Will Be Off and the Pipe Connects to Turbo Will Need Modification Radiator Hard Pipe Kit Shown On Installed Pictures Is NOT Included, We Offer It With Other Kits, Please Check Our website Application(s): - Chassis: Subaru BRZ/ Scion FRS - Motor: Toyota 2JZ-GTE - Turbo: Single Turbo (Not for Stock Twin Turbo)



Emission Notes:

All Parts and services offered by CX-GARAGE are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this competition use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assumes all associated risk of the purchase.

Federal and several state laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. CX-GARAGE assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer’s modifications and/or use of CX-GARAGE products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.