• Your shopping cart is empty!

CXRacing Turbo Kit + Intake Manifold for 1975-1978 Nissan 280Z / Fairlady Z L28/L28E Engine

This Kit is Designed and Made for Nissan 280Z, Brand New Aluminum Intake System and Turbo System Bring Your Fairlady Z to an Unprecedented Power Level While Keeping the Factory L28 Engine.

New Intake System:
-Aluminum Intake Manifold
-Built-in Velocity Stack for Each Cylinder, Smoother Air Flows
-Aluminum Fuelrail, AN8 Inlet/Outlet. Fits BOSH Style Injectors, 14mm O-Rings Slots and 60mm Length, Such as EV14L
-80mm Throttle Body Provision (See Picture for Bolt Pattern and Size). Throttle Body NOT Included.
-3x 1/8 NPT Vacuum Ports

Turbo System:
-Super Duty Thick Wall Manifold
-2.5" Vband Outlet, T3 Turbo Adapter, Best for Older Generation Engine Performance
-T3 GT35 3" Vband Outlet Turbo, Supports 500 HP
-Comes with Turbo Air Inlet Screen Filter
-44mm Vband Wastegate, 8 PSI
-3" Stainless Downpipe
　
Notes:
1. Need to Heat-Wrap the Intake and Exhaust Manifolds, One Roll of Heat Wrap is Included.
2. Injectors, Fuel Lines, Throttle Body, Exhaust Catback Are NOT Included.
3. Intercooler and Piping Kit Are NOT Included.

Application:
Chassis: 1975-1978 Nissan 280Z
Engine: L28/L28E

Product(s):
x1 Manifold Downpipe Kit With Elbow Adapter
x1 Aluminum Intake Manifold with Fuelrail
x1 GT35 Turbo Charger
x1 44mm 8PSI Vband Wastegate
x1 Oil Line Kit
x1 Air Screen Filter
x1 Oil Filter Sandwich and Oil Line Kit
x1 Set of Vband Clamp

























































Write a review

Please login or register to review

Turbo Manifold Intake Fuelrail Kit for 75-78 280Z Fairlady Z L28 L28E

  • Brand: CXRacing
  • Product Code: TRB-KIT-IM-L28-280Z-NOIC
  • Availability: In Stock

  • $1,999.00

Available Options


0 reviews / Write a review

Tags: CXRacing Turbo Kit + Intake Manifold for 1975-1978 Nissan 280Z / Fairlady Z L28/L28E Engine This Kit is Designed and Made for Nissan 280Z, Brand New Aluminum Intake System and Turbo System Bring Your Fairlady Z to an Unprecedented Power Level While Keeping the Factory L28 Engine. New Intake System: -Aluminum Intake Manifold -Built-in Velocity Stack for Each Cylinder, Smoother Air Flows -Aluminum Fuelrail, AN8 Inlet/Outlet. Fits BOSH Style Injectors, 14mm O-Rings Slots and 60mm Length, Such as EV14L -80mm Throttle Body Provision (See Picture for Bolt Pattern and Size). Throttle Body NOT Included. -3x 1/8 NPT Vacuum Ports Turbo System: -Super Duty Thick Wall Manifold -2.5" Vband Outlet, T3 Turbo Adapter, Best for Older Generation Engine Performance -T3 GT35 3" Vband Outlet Turbo, Supports 500 HP -Comes with Turbo Air Inlet Screen Filter -44mm Vband Wastegate, 8 PSI -3" Stainless Downpipe 　 Notes: 1. Need to Heat-Wrap the Intake and Exhaust Manifolds, One Roll of Heat Wrap is Included. 2. Injectors, Fuel Lines, Throttle Body, Exhaust Catback Are NOT Included. 3. Intercooler and Piping Kit Are NOT Included. Application: Chassis: 1975-1978 Nissan 280Z Engine: L28/L28E Product(s): x1 Manifold Downpipe Kit With Elbow Adapter x1 Aluminum Intake Manifold with Fuelrail x1 GT35 Turbo Charger x1 44mm 8PSI Vband Wastegate x1 Oil Line Kit x1 Air Screen Filter x1 Oil Filter Sandwich and Oil Line Kit x1 Set of Vband Clamp



Emission Notes:

All Parts and services offered by CX-GARAGE are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this competition use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assumes all associated risk of the purchase.

Federal and several state laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. CX-GARAGE assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer’s modifications and/or use of CX-GARAGE products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
Proposition 65 Warning:

These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.